VeEX MTTplus-900 Скачать руководство пользователя страница 40

Страница: 40 / 99

keys will start tracking the new SSID and stop the previous one.

Use the Left and Right arrow keys to scroll through the time x-axis, measured in seconds.

The time span per screen is 22 seconds. Pressing left or right on the arrow keys moves the

time span by 5 seconds.

Table Navigation

Use the Page Up/ Page Down arrow keys scroll through the table page by page.

Use the Up and Down arrow keys scroll through the table row by row.

Use the Left and Right arrow keys to scroll through SSIDs detected in the AP Scan table.

Warning

: If the Signal Level tracking is currently running, pressing the Left and Right arrow

keys will start tracking the new SSID and stop the previous one.

WX150 only:

Quick side buttons

on the WX150 can also be used to scroll through table results.

Go back to top

Go back to TOC

7.4.3 Signal Level View Function Keys

The function keys are located on the right side of the screen. Different function keys are available depending on whether Signal

Level tracking is running.

Function keys displayed while Signal Level tracking is running:

Start Scan

: Starts a new AP network scan.

Warning

: Starting the network AP will stop the current Signal Level tracking in progress.

Stop

: Stops in progress Signal Level tracking.

Table

Graph

: Table displays Signal Level view in table format; Graph displays it in graph format.

Pause/Label

: If

Location Label

is enabled in the Setup menu (see

WiFi Setup

), this function key is

used to pause the test and select a new location label. Refer to

Signal Level Tracking with Location

Label

for details.

Function keys displayed when Signal Level tracking is off:

Start scan

: Starts a new AP network scan.

Warning

: Starting the network AP will stop the current Signal Level tracking in progress.

Track Level

: Start Signal level tracking for the currently selected SSID.

Table

Graph

: Table displays Signal Level view in table format; the Graph key displays it in

graph format.

Locate

: Opens up the

Locate

function for the currently selected SSID (see

AP Locate Function

Go back to top

Go back to TOC

7.4.4 Signal Level View Fields and Measurements

Signal Level View Graph Measurements

Signal Level View Graph

WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00

Содержание MTTplus-900




































































































Результаты поиска

Содержание MTTplus-900

Отзывы:

Похожие инструкции для MTTplus-900

Бренды по названию

Популярные бренды

VeEX MTTplus-900, Руководство пользователя

Результаты поиска

Содержание MTTplus-900

Отзывы:

Похожие инструкции для MTTplus-900

Бренды по названию

Популярные бренды