Filtering for specific test types by tapping on the Test header icon
Fiber inspection test results belong to Common Mode and Fiberscope Tests. Filter parameters can be combined.
Filter Options
To filter by header type, use the stylus to tap on the
icon.
To reset filters, press the
Show All
button.
To select columns to hide/show, tap on
Column
to access the column visibility menu.
To search for files by specific criteria such as Job ID, Account, and Name, tap on the
Advanced
menu. To sort results in
ascending or descending order by header type, tap on the header. An arrow next to the header indicates the file sorting order.
6.8.6.2 Backing up and Restoring Test Profiles and Results From USB
The MTTplus Platform File Management system offers backup
To USB
and restore
From USB
functions to preserve user data.
Enabling To USB and From USB Functions
1. To enable the
To USB
and
From USB
functions, insert a USB Memory stick (FAT32 file format) into a USB port on the side
of the unit.
2. Wait for the USB memory to be detected (the folder icon will change appearance with a green USB memory icon).
After the unit detects the USB memory stick, it’s now possible to download files to USB or restore files from USB.
Downloading Files To USB
1. Select the desired test results, test profiles, screen capture and protocol capture files to be saved, using the individual þ
check boxes. For a full backup, check the master check box on the header and all files will be marked.
2. Tap the
To USB
button to initiate the file transfer procedure and wait for the progress bar to finish. Original files won’t be
deleted from the test set.
3. When all files have been copied to the USB, tap the folder icon (top-right corner) and select
Remove USB Drive
to make
sure all cached data is transferred to the USB drive, especially when transferring small files.
MTTplus-420_User_Manual_RevC00
Page 32 of 75
