VeEX MPA, Руководство пользователя

Страница: 712 / 842

Packet Tab
712
6. To Save a screen shot of any of the above graphs to a Screen(#).bmp file,
select the button from the common functions row, and then press the
button
RFC Tests - Through Put Test (Thru Put)
This is an RFC 2544 benchmark test that calculates your network's throughput rate. The
fastest throughput speed is indicated by the rate at which the transmission and
reception of the Ethernet test stream is accomplished without packet loss.
The following options appear on the Thru Put screen:
Option Description
Stream ID
Displays the ID number of the stream that will be used for the
RFC test.
The Stream ID is configured from the RFC Tests - Conf
screen.
Trial Duration Displays how long the test will run for each packet size. This
duration is used each time the test fails.
The Trial Duration is configured from the RFC Tests - Conf
screen.
BW Ceiling Displays the setting for the high-end of the bandwidth test
range.
The BW Ceiling is configured from the RFC Tests - Conf
screen.
Dest MAC
Address Displays the destination MAC address of the device that will
receive the RFC test.
The Dest MAC Address is configured for the selected
Stream ID from the Traffic Stream Profile on the Conf screen.
Dest Port Displays the destination port that will receive the test signal.
The destination port configuration setting is not supported
on the MPA.
MPA_e_manual_D07-00-129P_RevA00