USB 2.0 Client port:
To connect USB memory drives, WiFi or VoIP adaptors (accessories are shown below)
USB 2.0 Host port:
To connect USB printer (future firmware release)
4.5 LEDs
The LX100 is equipped with three LEDs providing the following functions;
The
Power LED
indicates the power state of the unit. The LED is off when the unit is powered off. The LED is green
when the unit is powered on. The LED is orange when the unit is connected to the AC Main and powered off.
The
IP LED
is linked to the IP connection function. The LED is solid red when there is no IP connection or green when a
valid IP connection is established.
The
WiFi LED
indicates a successful WiFi connection.
Note: T
he LED history function and LED reset function key on the rubber keyboard (O -> O) serves no function on the LX100.
LX100 e-Manual D07-00-019 Rev A01
Page 7 of 44
