Tank Setup Screens
[125-128] Tank Setup Screen 3
52
Table 3:
Calculating Tank Tilt
Use the worksheet below to record measurements and perform Tank Tilt calculations for each of the tanks.
1. Stick the tank at the fill riser opening at least three times. Record the average reading in column A of the chart.
2. Before beginning this step, make sure the Tank Tilt [126] on the screen = 0. Record the probe’s Fuel
Height (In-Tank Inventory Function) reading in column B of the chart.
3. Subtract the value entered in column B from the value entered in column A. Record the result in
column C.
4. Measure the distance in inches (or millimeters if you use Metric Units) between the probe and fill risers.
Record the measurement in column D.
5. Divide the value in column C by column D to determine the pitch. Record the results in column E.
6. Measure the distance in inches or millimetres from the probe riser to the center of the tank. Record the
distance in column F.
7. Multiply column E by column F to determine Tank Tilt (E X F = Tank Tilt Value). Record the value in
column G.
Tank Tilt Calculation Worksheet
Tank
No.
A
Stick Gauge
Avg. Height
@ Fill Riser
B
Probe’s Fuel
Height Reading
(Probe Riser)
C
(A - B = C)
D
Distance
Fill to Probe
Risers
E
Pitch
(C / D = E)
F
Distance from
Probe Riser to
Center of Tank
G
Tank Tilt*
(E x F = G)
1
2
3
4
5
6
*
Tank Tilt may be a positive (+) or negative (-) value. If it is a negative value, BE SURE to change the value symbol to minus
(-) when entering a negative Tank Tilt value.
Содержание TLS2P
