2-3
2
Front Panel Keypads
Using the Alphanumeric Keys
Using the Alphanumeric Keys
You use alphanumeric keys to enter data during the setup process. When a numeric value is required (i.e.gallons,
time, etc.), the keys provide only a numeric function. When you can enter either alphabetic or numeric characters
(i.e. station headers, sensor locations, etc.), the keys provide both functions.
TANK/SENSOR
The TANK/SENSOR key is used to advance by tank or sensor through setup procedures or dis-
played data.
CHANGE
CHANGE is used in Normal and Setup modes to enter data, revise existing data or change an
entry.
ENTER
ENTER completes a selection or enters data into a function. It is also used to start certain func-
tions such as leak tests.
BACKUP
BACKUP lets you move back through Steps, Functions and Modes to access data or entries you
have already passed in the normal progression. It eliminates the need to move completely
through a function or mode to access a step recently passed.
BACKUP will move through the hierarchy of commands as follows: through Steps within a Func-
tion to that Function; then back through Functions to Mode; then back through Modes.
Press PRINT to generate inventory, delivery, leak test, status, setup, diagnostic and alarm history
reports.
TANK
SENSOR
CHANGE
ENTER
BACKUP
