Assembling Probe Components
Attaching Cable Connector to Probe Canister
7
2.
Insert probe into the tank. Attach the existing cable connector to the threaded connector on top of the probe
canister and tighten down the integral nut.
3.
Save the remaining kit components and refer to the appropriate Site Prep Manual to install the probe in the
tank and connect it to the field wiring from the console.
4.
Refer to the appropriate console setup instructions to configure the Mag Plus Density Probe.
Jump back to Welcome.pd
Table 3. Record of Installed Probe Float and Density Codes by Tank
Tank/Product
Float
Size
Density Code
1/
2/
3/
4/
5/
6/
7/
8/
9/
10/
11/
12/
13/
14/
15/
16/
4/Diesel
2-inch
B7053686719512
Example
