18
Changing The Insite360 Connect Configuration
The Insite360 Connect will automatically configure itself. Alternately, you can access an interface that allows you
to edit network and POS connection settings.
1.
www.veeder.com
.
2.
Connect the laptop directly to the Ethernet port of the Insite360 Connect using an Ethernet crossover cable
(not provided). Power up the Insite360 Connect and use a browser to connect to the static IP address
http://192.168.101.1:8888/
for the Insite360 Connect.
For a successful connection, because you are directly connecting two devices (the Insite360
Connect and a laptop), you must use an Ethernet crossover cable (not provided).
The following settings are available via the interface:
Network parameters below are defaults and may have changed - consult the customer’s IT department for the
site’s actual parameters.
Veeder Root
POS
Connection Type
Static
IP Address
192.168.101.1
Net Mask
255.255.255.0
Gateway
192.168.1.1
Primary DNS
192.168.1.1
Secondary DNS
192.168.1.2
Save
Network
