Veeder-Root EMR3 XStream-PKG Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 70

background image

EMR

3

Setup and Operation Manual

Typical Dispensing Examples

52

DISPENSING CURRENCY WITH PRICE CODE AND VOLUME PRESET BEFORE DISPENSING

1. In Currency Mode, press NEXT button to display Change Price screen.

2. Press +/- button to scroll to the desired price code and press ENTER Button. The net price is displayed.(If the

user wishes to alter the price while retaining the associated tax code they press NEXT again to Enter Price
screen. Using the NEXT button, +/- button, followed by ENTER button, the new base price is achieved and the
new net price is displayed.)

3. Press MODE button to navigate to Volume Mode.

4. Press PRESET button to navigate to Preset screen.

5. Press NEXT button to Change Preset, select the default preset desired then enter to accept the value. If the

user wishes to alter the preset they press NEXT again to Enter Preset screen. Using the NEXT button, +/-
button, followed by ENTER button, the new preset value is achieved and the new preset is displayed. If the
user wishes to disable the preset they press NEXT then scroll to Disable and press ENTER. The Icon to the left
of the preset field will flash when the preset is disabled and remain solid when it is active.)

6. Press MODE to return to Currency Mode.

7. Press START to begin delivery (if Display Head is configured for more than one product, you must select a

product first).

8. Press FINISH button to print Ticket.

DISPENSING CURRENCY WITH PRICE CODE & VOLUME PRESET AFTER DISPENSING

1. In Currency Mode, press NEXT button to display Change Price screen.

2. Press +/- buttons to scroll to the desired price code and press ENTER Button. The net price is displayed.(If the

user wishes to alter the price while retaining the associated tax code they press NEXT again to Enter Price
screen. Using the NEXT button, +/- button, followed by ENTER button, the new base price is achieved and the
new net price is displayed.)

3. Press START to begin delivery (if Display Head is configured for more than one product, you must select a

product first).

4. Press MODE button to navigate to Volume Mode.

5. Press PRESET button to navigate to Preset screen.

6. Press NEXT button to Change Preset, select the default preset desired then enter to accept the value. (If the

user wishes to alter the preset they press NEXT again to Enter Preset screen. Using the NEXT button, +/-
button, followed by ENTER button, the new preset value is achieved and the new preset is displayed. If the
user wishes to disable the preset they press NEXT then scroll to Disable and press ENTER. The Icon to the left
of the preset field will flash when the preset is disabled and remain solid when it is active.)

7. Press MODE to return to Currency.

8. Press FINISH button to print Ticket.

DISPENSING WITH TANK ID ENABLED

1. The operator is ready to dispense and presses START.

2. The display will show TANK ID (the default label) or whatever was entered in SETUP LABELS (see C&C

Mode, Figure 32 on page 30) in the Descriptor Field.

3. Press NEXT, and either; ENTER to accept TANK DEFAULT (or whatever was entered in SETUP LABELS - see

C&C Mode, Figure 32 on page 30); or use the +/- button to enter a different label (up to 16 characters). Press
ENTER when you have entered the desired label. Note, if you were to press ENTER when TANK ID displays,
the message TANK ID NOT ENTERED will scroll across the Descriptor Field. To avoid seeing this message,
you have to press NEXT after TANK ID displays.

4. Begin your delivery.

«
...
56
57
58
59
60
...
»

Содержание EMR3 XStream-PKG







































































Отзывы:

Нет отзывов

Похожие инструкции для EMR3 XStream-PKG

Бренд: Bacharach Страницы: 60

Бренд: Bacharach Страницы: 4

Бренд: Bacharach Страницы: 17

NUFLO Scanner 2000 microEFM

Бренд: Cameron Страницы: 8

Бренд: R&S Страницы: 733

Бренд: R&S Страницы: 369

Бренд: Hanna Instruments Страницы: 2

Бренд: bmcm Страницы: 5

Бренд: Tektronix Страницы: 48

Бренд: Stübbe Страницы: 12

BUCKMASTERS 1500

Бренд: Sig Sauer Страницы: 2

Бренд: Supertech agroline Страницы: 10

Бренд: POSEIDON Страницы: 13

Бренд: Chauvin Arnoux Страницы: 44

Бренд: Droplet Страницы: 35

Бренд: Sencore Страницы: 75

Бренд: truflo Страницы: 33

Бренд: Velleman Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды