12
Setup Mode
Initiating the Setup Mode
1. Turn On power to the Display Head and wait until the boot-up sequence completes.
2. Depress the MODE button until the indicator at the bottom of the display points to Setup.
3. On initial power-up of the Display Head, the first Setup Mode category, PRICING, displays in the Descriptor
Field. Press NEXT to enter Pricing Setup, or continue to press the
button to step through the remaining
Setup Mode categories. Press NEXT to enter any category once it displays in the Descriptor Field.
Setup Mode Categories
The non-metrologically controlled Setup Mode categories for the EMR
3
System are:
•
Enter Security Code
- enables user log in/out procedure. (Note: This prompt will not display on initial power-up
of the Display Head. If you have enabled Security Code in the C&C Mode, this prompt will be the first category
to display on entering Setup Mode).
•
Pricing
setup - sets up to 15 different price codes with tax/discount code assignments.
•
Tax/Discount
setup - sets up to 15 different tax/discount (T/D) codes with up to 6 different T/D modifiers per
code.
•
Defaults
setup - lets you set the mode you want the Display Head to enter when beginning pre-dispense and
dispense operations; and lets you enable/disable volume and currency mode presets.
•
Relay Control
setup - sets the shutoff points for flow control relays 1 and 2 for preset deliveries.
•
Security
setup - sets the user Passcodes and user access to certain Setup Mode categories. (This setup only
displays after enabling Security Code in the C&C Mode).
•
Printer Option
setup - sets optional printer type and distance from top of ticket to first printed line.
•
View Records
setup - lets you select to either view or print any of the last 50 transaction records.
•
Restore Records
- Allows the user to restore (download from IB to Display Head) up to the last 50
transactions.
•
Shift
setup - sets up shift start/end times, start/end odometer readings, and tank loadings. Also within Shift
setup, you can print out shift reports.
•
Date Format
setup - sets the format of year, month, and date for use in display and printouts.
•
Time/Date
setup - lets you enter the current time and date.
•
System Address
setup - sets the addressing and configuration of the individual EMR
3
components and their
inputs from, and outputs to, the system.
•
Time Delays
setup - sets the delay (in seconds) after which the display will go blank if there is no activity.
•
Version Number
- lets you view system device version numbers.
•
C&C
- lets you step through and view, but not change, the C&C Mode setups (see page 29).
Instructions for setting up the Setup Mode categories are shown in the figures that follow. In some cases multiple
figures are used to explain sub-procedures within a Setup Mode category.
Note, once you have entered a Setup Mode category (pressing NEXT), do not press the ‘+’, ‘-’ buttons in that
setup if you do not intend to change a value, because when you press ENTER, the change, even if unintended, will
be accepted. If you want to view setup settings without making changes, press NEXT to move ‘into’ a category’s
setup and ENTER to ‘back out’ of the setup.
