17
Initial Startup Procedure
Once the probes, sensors, communication devices, etc., are connected to the console, remove and discard the
backup battery isolator strip (item 11 in Figure 2).
Replace front cover. Attach a label to the breaker feeding the console. This allows others to know how to
disconnect power to the console when servicing the system. Communicate to facility personnel which breaker
feeds the console.
Switch the dedicated circuit breaker ON to apply power to the console.
TLS4 GUI NAVIGATION
If the operation of the TLS4 is unfamiliar, review the TLS4 Quick Help Guide (P/N 577014-034) or, after the home
screen displays, touch the Actions icon
, then the Help icon
to open the TLS4 console’s online help.
Once online help displays, touch the
Show TOC
link in the top left of the display to view the online help’s Table Of
Contents. Read the Welcome, Explanation of Screen Icons, How to Use On-Screen Keyboard and Using
Touchscreen with Help topics.
TLS4 INITIAL SETUP
Workflow Wizard is an application in the TLS4 that guides the user through the Veeder-Root recommended setup
screens during the console’s initial commissioning. From the console’s touch screen, Workflow Wizard Setup can
be accessed by touching Menu>Setup>Workflow Wizard>Setup Workflow.
