VeeaR EasyVR 3 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 70

VeeaR EasyVR 3 Скачать руководство пользователя страница 18

www.veear.eu

18

EasyVR 3

User Manual (1.0.11)

EasyVR Shield 3 for Arduino

Product description

The  EasyVR  Shield  3  is  an  adapter  board  for  the  EasyVR  3
module,  designed  to  simplify  its  use  among  the  Arduino
community.

The Shield is compatible with any Arduino board using UNO-
R3  Shield  headers,  running  at  either  3.3V  or  5V  levels,  by
using the IOREF pin to select the EasyVR operating voltage.

It is also backward compatible with earlier Arduino boards that
don’t  have  the  IOREF  pin,  which  are  using  5V  I/O  levels  by
default.

If your board does not have the IOREF pin but it is running at 3.3V, you can still operate the EasyVR Shield 3
correctly if you manually connect pins IOREF and 3V3 together, for example with a jumper wire.

The board comes with separate Arduino stackable headers for the Shield interface. The EasyVR 3 module is
also provided separately.

Note

: The EasyVR 3 module and all stackable headers must be soldered before use!

EasyVR Shield 3 Features



Compatible with Arduino boards that have the 1.0 Shield interface (UNO R3) and legacy boards
including, but not limited to:

o

Arduino Duemilanove

o

Arduino Uno

o

Arduino Mega

o

Arduino Leonardo

o

Arduino Due



Supports 5V and 3.3V main boards through the IOREF pin



Supports direct connection to the PC on main boards with a separate USB/Serial chip and a special
software-

driven “bridge” mode on boards with only native USB interface, for easy access by the

EasyVR Commander



Enables different modes of serial connection and also flash updates to the embedded EasyVR
module (through the Mode Jumper)



Supports remapping of serial pins used by the Shield (in SW mode)



Provides a 3.5mm audio output jack suitable for headphones or as a line out

EasyVR Shield 3 fully assembled

«
...
16
17
18
19
20
...
»

Содержание EasyVR 3







































































Отзывы:

Нет отзывов