Vectron Vario II, Руководство пользователя

Страница: 71 / 112

71
EN
7.7. Working with repor ts
This chapter informs you about the report function. Wheth-
er or not you can use this function depends on program-
ming and configuration of your Vario II.
In reports you can evaluate data that was stored in the
POS system. The Vectron POS software provides several
standard reports. You can display and print PLU- and op-
erator reports for example. A PLU report can contain e.g.
PLU numbers, PLU names, the number of sold PLUs, the
sales per PLU and the total sales. An operator report can
contain e.g. the proceeds of the operators and the sales
per customer.
You can create two types of reports with Vectron POS
software: X-reports and Z-reports. X-reports are intermedi-
ate reports, where the data is not deleted from the book-
ing memory. Z-reports are final reports, where the data is
deleted from the booking memory.
Your Vectron dealer can program and configure reports
according to your requests.