Vectron POS Mini II, Руководство пользователя, Страница: 43 / 110

43
EN
6 .1. Set up of Mini II
This chapter tells you how to set up Mini II, how to con-
nect it to the power supply and how to connect devices to
Mini II.
6 .1.1. Selecting the setup site for Mini II
This chapter informs you about the setup site for Mini II.
NOTICE
a
X
Never set up the power supply and
the POS system other than described
in the instructions
.
•
You can damage
power supply and
POS system
if for instance the setup
site is not stable.
• Set up the Mini II in a well-ventilated room with a tem-
perature between 0 and 40 °C.
• Do not cover the Mini II.
• Select the setup site so that the Mini II is not exposed to
direct sunlight.
• Place the Mini II on a stable, even surface with sufficient
space.
• Never place the Mini II next to e.g. sinks or dispensing
systems to avoid that liquids are poured over the Mini II,
power supply Vectron PS60/PS61 and power cord.
• Lay out the cables so that they are not under tension.
• Lay out the cables so that you do not trip over them.