Vectron Duratec POS S15 II, Заметки о безопасности и установке

Страница: 24 / 52

24
D
a brand of Vectron
POS S15 II
3. Starting
i
Your Duratec specialist retailer has programmed the POS S15 II for
you. If necessary, he will be glad to support you during initial start-
up and will train you in using your POS system.
3.1 . Setting up the POS S15 II
3.1 .1 . Selecting the setup site for the POS S15 II
f
Set up the POS S15 II in a well-ventilated room with a temperature
between 0 and 40 °C.
f
The POS S15 II must not be covered during operation.
f Select the setup site so that the POS S15 II is not exposed to direct
sunlight.
f Place the POS S15 II on a stable, even surface with sufficient space.
f
Make sure that no liquids can flow over the POS S15 II , the power
supply unit or the mains cable.
f
Route the cables so that they are not subject to tensile loading.
f Route the cables so that no one can trip over them.