background image

WARRANTY

T

his  limited  warranty  program  is  the  only  one  that  applies  to  this  product,  and  it  sets  forth  all  the  responsibilities  of

Vector  Manufacturing,  Ltd.,  regarding  this  product.  There  is  no  other  warranty,  other  than  described  herein. 

This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free of defects in materials and work-
manship for five years from the date of purchase without additional charge. The warranty does not extend to subsequent pur-
chasers or users. Vector Manufacturing, Ltd. will not be responsible for any amount of damage in excess of the retail purchase
price of the product under any circumstances. Incidental and consequential damages are specifically excluded from coverage
under this warranty.

This product is not intended for commercial use. This warranty does not apply to accessories or damage to units from misuse
or incorrect installation. Misuse includes wiring or connecting to improper polarity power sources.

RETURN/REPAIR  POLICY:

Defective  products,  other  than  accessories,  may  be  returned  postage  prepaid  to  Vector

Manufacturing. Any defective product, other than accessories, that is returned to Vector Manufacturing within 30 days of the
date of purchase will be replaced free of charge. If such a product is returned more than 30 days but less than five year from
the  purchase  date,  Vector  Manufacturing  will  repair  the  unit  or,  at  its  option,  replace  it  free  of  charge. 
If the unit is repaired, new or reconditioned replacement parts may be used, at Vector Manufacturing’s option. A unit may be
replaced with a new or reconditioned unit of the same or comparable design. The repaired or replaced unit will then be war-
ranted under the terms of the remainder of the warranty period. The customer is responsible for the shipping charges on all
returned items after 30 days. During the warranty period, Vector Manufacturing, Ltd. will be responsible for the return shipping
charges.

LIMITATIONS: 

This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from normal wear and

tear (including chips, scratches, abrasions, discoloration or fading due to usage or exposure to sunlight), accidents, damage
during shipping to our service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure to follow instruc-
tions for care and maintenance, fire, flood and Acts of God. 

If your problem is not covered by this warranty, call our Technical Support Department toll free: (866) 584-5504 for general
repair information and charges if applicable. You may also contact us through our website at www.vectormfg.com.

STATE  LAW  RIGHTS:

This  warranty  gives  you  specific  legal  rights.  Some  states  do  not  allow  limitations  on  how 

long  an  implied  warranty  lasts  or  the  exclusion  or  limitation  of  incidental  or  consequential  damages,  so 
the exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal rights; other rights,
which vary from state to state, may apply.

TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT:

Contact Vector Manufacturing Technical Support by telephone,

fax  or  mail.  We  suggest  that  you  keep  the  original  packaging  in  case  you  need  to  ship  the  unit. 
When  returning  a  product,  include  your  name,  address,  phone  number,  dated  sales  receipt  (or  copy)  and 
a  description  of  the  reason  for  return  and  product  serial  number.  After  repairing  or  replacing  the  unit,  we  will 
make every effort to return it to you within four weeks.

WARRANTY ACTIVATION:

Please  complete  Warranty  Activation  Card  and  mail  to  Vector  Manufacturing. 

Enter “VEC1095A” as Model and “12V 2/10/25 Amp Battery Charger” as  Product Type. All Vector Manufacturing, Ltd. prod-
ucts must be registered within 10 days of purchase to activate this warranty. Mail the completed registration form, along with
a copy of the original sales receipt to:

ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, Ltd.

4140 SW 28th Way, Ft. Lauderdale, FL 33312 

PH: 954-584-4446 • TOLL FREE: 866-584-5504 • Fax: 954-584-5556. 

You may also contact us at our web site www.vectormfg.com.

WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.

DS071204

12

Содержание VEC1095A













Отзывы: