Vector VEC1086 A Скачать руководство пользователя страница 2

VEC1086 A

REV101103

2

PERSONAL PRECAUTIONS AND SAFETY

1. Another person should be within range of your voice or close enough to come to your aid when you work near a 

lead-acid battery.

2. Fresh water and soap should be nearby in case battery acid contacts skin, clothing, or eyes.
3. Wear complete eye protection and clothing protection. Avoid touching eyes while working with a battery. Acid, acid

particles or corrosion may get into eyes. Immediately flood eye with cold water (Eye Wash Station) for at least 10 

minutes and seek medical attention immediately.

4. If battery acid contacts skin or clothing, wash immediately with soap and water.
5. NEVER smoke or allow a spark or flame in vicinity of battery or engine.

6. Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead acid battery.

A lead-acid battery can produce a short-circuit current high enough to cause a severe burn.

AC POWER CORD CONNECTION

Charger is equipped with an AC cord with a "polarized" plug. The plug must be plugged into a properly installed
110/120VAC polarized outlet in accordance with all local codes and ordinances. This battery charger is for use with a
110/120VAC polarized plug ONLY

CAUTION:

Dropping a metal tool onto battery. It might spark or short-circuit battery or other

electrical part 

that may cause explosion.

DANGER!

NEVER alter AC cord or plug – if it will not fit outlet, have proper outlet installed

by a qualified electrician. Improper connection may result in an electric shock. 

Содержание VEC1086 A











Отзывы: