© Vectron Systems AG | Current as of 12/18 | Alterations and errors excepted.
41
9. Errors, possible reasons and
troubleshooting
Errors
Possible reasons
Troubleshooting
The POS Touch 14 Wide
cannot be switched
on.
The safety plug is not put into a
voltage-carrying outlet.
Put the safety plug of the
supplied mains cable to an
earthed socket to which
alternating current between
110 and 240 volts is connected
and which is protected with a
residual-current circuit breaker.
The power supply plug is not put
into the power connector of the
POS Touch 14 Wide.
Put the power supply plug into
the power connector of the
POS Touch 14 Wide.
The On/Off key is damaged.
Contact your dealer Vectron.
The power supply is damaged.
Contact your dealer Vectron.
The POS Touch 14 Wide is
damaged.
Contact your dealer Vectron.
The POS Touch 14 Wide
does not react to
your entries.
The signed-in operator is not
authorized for the respectiv
function.
Contact your dealer Vectron.
The Vectron POS software is
malfunctioning.
Reboot the POS Touch 14 Wide
as described in chapter 7.1.3
“Restart POS Touch 14 Wide” on
page 27.
Programming and configuration
of the POS Touch 14 Wide is
faulty.
Contact your dealer Vectron.
The touch screen is damaged.
Contact your dealer Vectron.
The POS Touch 14 Wide was
switched off while the operator
key was inserted; then, the
operator key was removed.
Restart with the operator key
plugged in or delete the hold
buffers in the programming.
Содержание POS TOUCH 12 WIDE
Страница 1: ...Notes on safety and installation POS Touch 14 Wide...
Страница 2: ......
Страница 3: ...YOUR VECTRON DEALER...
