15
* It is recommended to use a 191/192 thermometer to measure the tip
temperature.
* If the password is locked, the temperature cannot be calibrated, and the
correct password must be input to operate.
12.Maintenance of Tips
1) When the new tip is used for the first time, add tin to protect it when
the temperature is 250 ~ 280 ℃.
2) Select the appropriate tip size according to the size of soldering joint.
3) In order to prevent the oxidation of tip, a layer of melting tin should be
plated before placing it into the holder.
4) In order to avoid rapid cooling of tip, the cleaning sponge should not
be wet with too much water. But using cleaning sponge that is not wet
will damage the tip and lead to failure of tinning the tip.
5) When the tip is oxidized due to improper use, do not clean the surface
coating by grinding but use metal filament or resurrection ointment to
clean it at 250 ~ 280 ℃.
6) When soldering, do not apply gravity to tip and avoid adding tin to the
same place to operate.
7) Try to solder at low temperature, and the temperature is usually
controlled at 320 ~ 380℃. If it is necessary to solder at high temperature,
please analyze the adaptability of soldering station and tip before
soldering.
