7
7.Connection
1)Insert the seven-core plug at the other end of the soldering pencil into
the seven-core socket on the main unit panel (pay attention to the
insertion position of the plug), and place the soldering pencil in the
holder.
2)Insert the power plug of the soldering station into the power socket.
3)Insert one end of the grounding core into the grounding jack of the
soldering station, and connect one end to anti-static ground.
8.Turn On/Off
Switch on/off, which can be divided into hard switch and soft switch.
1)Hard switch on / off: The power switch on the back of the main unit can
realize hard switching.
2)Soft switch on / off:After the power switch is powered on, it can be
turned on or off by long pressing the POWER key for 2 seconds.
9.Temperature Settings
Note:
1) When setting the soldering temperature, make sure that the soldering
temperature is adjustable.
2) Enter the correct password, or the initial password "000000".
There are three temperature channels in total. Long press"1","2"and "3"
keys on the main unit to quickly select the channels corresponding to
CH1, CH2 and CH3 respectively. The temperature of channel 1, channel
2 and channel 3 is 100 ℃, 350 ℃ and 400 ℃ respectively. On this
interface, the temperature value can be changed through the "+" and "-"
keys, and the temperature range is 100 ~ 450 ℃.
