
102
©Vecow RCX-1000 User Manual
SYSTEM SETUP
3.12 Installing the hold down bar for RCX-1400F/
1400 Series
Step 1
Fasten screws on two sides of the main frame.
(The default position is L2 and R2. It can be adjusted to L1 and R1 or L3
and R3 depending on the length of the card being fixed.)
L1
L2
L3
R1
R2
R3
Step 2
Adjust the plate left or right to fix the card and then fasten two
screws on the marked yellow area.
Step 3
Turn the screw (circle in red) left or right with Phillips screwdriver
to adjust the pad up and down.
down
up