VDO DTCO 4.1, Инструкция по эксплуатации

Страница: 94 / 172

7
Menus Second menu level – menu functions
94
Instruction manual DTCO 4.1 - Edition 02/2023 - BA00.1381.41 100 102
11. Pairing has been successfully com-
pleted.
entry stored
Fig. 104: Save confirmation
12. “

” is now displayed in the top row
of the standard display
è
Displays
[
}
40] .
IMPORTANT
When removing the driver card,
Bluetooth automatically becomes inact-
ive.
When re-inserting the driver card,
Bluetooth automatically becomes active
again.
IMPORTANT
When using the remote control, the
user is responsible for the legal com-
pleteness and correctness and recog-
nises this by using the remote control.
The use of the remote control is not
part of the legal tachograph system. It
is used on the operator's own respons-
ibility.
The periods during which a remote con-
trol was used, can be printed and dis-
played.
è
Daily printout of the vehicle [
}
124]
Miscellaneous
In this display, you can make user-spe-
cific entries.
► Menu point entry vehicle
Enter OUT start / end
If you are driving the vehicle outside of
the scope of the regulation, you can set
the function
out of scope in the follow-
ing menu and terminate if required.
The following journeys can be outside of
the scope:
• Journeys on non-public roads.
• Journeys outside of AETR states.
• Journeys for which the total weight of
the vehicle does not require use of the
DTCO 4.1 in accordance with the reg-
ulations.
Select the listed functions step by step.