VDO DTCO 4.0, Инструкция по эксплуатации

Страница: 129 / 156

9
Data set for events or faults Print
© Continental Automotive GmbH
129
• From the selected day, a
diagram showing the activit-
ies of the last seven calen-
dar days is created
[30] Recording of the speed profile
of the selected day
[31] Recording of additional work
groups, such as use of blue
light, siren etc.:
• Legend of the symbols
• From the selected day on,
there is a diagram of status
inputs D1/D2 of the last 7
calendar days;
[32] Chronological listing of inserted
driver cards
[33] Please note:
No authorised printout.
According to the Regulation
(e.g. retention requirement), a
printout in local time is invalid
[34] Period of the printout in local
time:

= Start of recording

= End of recording
UTC +01h00 = Difference
between UTC time and local
time.
[35] Date and time of the printout in
local time (LOC).
[36] Type of printout, e.g. SYMBOL
in local time
■ Data set for events or faults
For each detected event or fault, the
DTCO 4.0 registers and stores the data
based on predetermined rules.
(1) Purpose of the data set
(2) Number of similar events on that day
The data record purpose (1) indicates
why the event or fault was recorded.
Events of similar type which occur sev-
eral times on the same day, are shown
on position
(2).
► Coding of data set purpose
The following overview shows the events
and malfunctions, sorted by error type
(cause) and assignment of the data set
purpose.
Service Only!