![background image](http://html.mh-extra.com/html/vdo/ctc-ii/ctc-ii_operating-instructions-manual_858229047.webp)
II
• E
01
/2
00
9
47
Device testing
Speed test (MTCO 1324, SE2400)
7.1
Speed test (MTCO 1324, SE2400)
Testing the accuracy of the speed indicator and the speed
recording on the tachograph chart (record sheet).
During a speed test, three points must be approached; these
points differ according to the upper limit of the measuring
range of the tachograph; see the following table.
This Chapter explains the possible functions available for
device testing using the CTC II.
Chapter 2.8
"Program overview (menu tree)"
on
Page 26
tells
you which functions are available for a connected
tachograph.
◄
Important
Fig.
3: Speed test
Upper limit of the measuring range [km/h]
100
125
140
180
1. Measuring point [km/h]
27 … 30
37 … 40
37 … 40
57 … 60
Break
120 seconds
2. Measuring point [km/h]
57 … 60
77 … 80
77 … 80
97 … 100
Break
120 seconds
3. Measuring point [km/h]
87 … 90
117 … 120
117 … 120
157 … 160
Break
120 seconds