![background image](http://html.mh-extra.com/html/vdo/ctc-ii/ctc-ii_operating-instructions-manual_858229013.webp)
II
• E
01
/2
00
9
13
For your safety
Installation instructions
1.6
Installation instructions
Power supply
The test device may only be connected to the voltages
stipulated in these Operating Instructions.
Connection cables
Ensure that no one can stumble over the cables.
Accessories
Do not modify accessories in any way whatsoever! Never use
accessories or spare parts which have not been
recommended by the manufacturer - they can cause adverse
effects, operational disruptions and accidents.
1.7
Preserving the test stand's value
Maintenance and
repairs
The test device is sealed - only qualified customer service
personnel may maintain and repair it; also see
Chapter 13.1
Page 85
.
Control checks
Check the test device (and the accessories) before using it.
Replace damaged parts immediately!
Cleaning
Before cleaning the test device, disconnect the power supply.
Do not use any volatile solvents to clean the device, e. g.
alcohol, thinners, benzine and abrasive cleaning agents.
Danger of short-circuits!
Cables damaged by other objects can cause short-circuits,
adverse effects and malfunctions.
Replace damaged cables immediately!
◄
Caution
The use of non-authorised accessories invalidates the
CE certificate of conformity!
◄
Important