Installing the Roller Interface Module
Sealing the Roller Interface Module
20
• Edition 01/2
009
Sealing the Roller Interface Module
When sealing, make sure that
•
the sealing pliers are adjusted correctly and that the assigned seal
number is used.
•
the sealing wire is short, making it impossible to open the cover.
•
the sealing wire does not cause any short-circuits.
Not every country's legal regulations stipulate that sealing must take place.
Always adhere to your country's valid legal regulations!
Important
You have connected all the Roller Interface Module's necessary
components.
◄
Condition
1
Two-hole seal
1