VDL Futura FHD2 E6, Руководство по ремонту

Страница: 142 / 184

0
Futura FHD2/FMD2 E6
CLEANING INSTRUCTIONS
General information
1 - 2
5
DD1020_01
1.1 CLEANING THE VEHICLE
Cleaning the vehicle with a high-pressure hose
If the vehicle is cleaned with a high-pressure hose, then
attention must be given to the following:
1. Make sure the doors, windows and roof hatches are
securely closed when cleaning the vehicle.
2. The maximum permitted water temperature is 50 °C.
3. The maximum permitted water pressure is 80 bar.
4. Maintain a minimum distance of 30 cm from the surface
to be cleaned.
5. It is not permitted to use additives.
6. Do not aim the jet directly at electrical connections, such
as connectors, lighting feed-through connections, etc.
7. Avoid spraying valves, connectors, oil seals, seals and
other sensitive parts, because this may lead to a fault.
8. Never aim the jet of a high-pressure hose directly at the
steering box.
9. When cleaning the universal joint on the steering box, the
spider seals may be forced open by the high-pressure jet
of water, so that the grease behind them will be flushed
away. As a result, the spider may get stuck and cause the
steering mechanism to jam.
10. Be careful not to damage the lamellae when cleaning the
cooling unit's radiator/intercooler elements.
11. Do not direct the jet of the high-pressure hose at the air
conditioning system’s condenser for too long. As a result
of the high temperature, excessive pressure will build up
in the system, which will cause damage to the system.
12. Ensure that no water can enter via the bleed openings of
any of the reservoirs.
13. When cleaning the vehicle, make sure no water enters
the air intake system via the air intake or the flexible
seals.
14. When the vehicle has been cleaned, it must be lubricated
again with a grease gun or via the central lubrication sys-
tem. This is important, because it prevents the penetra-
tion of moisture and dirt at the various pivot points.
15. Do not aim the spray too long at the same place, because
this can result in the penetration of moisture.
Cleaning the vehicle in a car wash
If the vehicle is cleaned in a car wash, then attention must be
given to the following:
1. Make sure the doors, windows and roof hatches are
securely closed when cleaning the vehicle.