VCS VIP 1000, Руководство пользователя

Страница: 65 / 118

Chapter 6 Configuring the Transmitter
VIP 10 / VIP 1000 65
selected network. The firmware will be installed there automatically after the
connection is closed.
This allows a VIP unit to be serviced and updated remotely without intervention
by a technician to make on-site changes to the unit installation.
The latest firmware can be obtained from VCS Customer Service or downloaded
from the Internet at our Web site www.vcs.com.
Warning!
Before starting the firmware upload, be certain that you have selected the
correct upload file! Uploading the wrong files can result in the unit no longer
being addressable, requiring it to be replaced. Never interrupt the
installation of the firmware. Interruption will damage the Flash EPROM.
This can also render the unit inoperable and make replacement necessary.
– First, save the update file to the hard disk.
– Enter the full path for the update file in the field or click Durchsuchen... to
locate and select the file.
– Click Upload to begin transmission to the unit. Transmission progress can be
monitored from the status messages and the progress bar.
After the upload is completed successfully, the unit will restart automatically.
If the operating status LED flashes red and green alternately, the upload has
failed and must be done again. This requires that you work from a special page:
– Enter the IP address of the unit in the browser and append
/main.htm
(for
example
192.168.0.12/main.htm
).
– Repeat the upload.
Configuration download:
You can save the unit's configuration data to a PC.
– Click Download . A dialog box will appear.
– Follow the instructions in the dialog box to save the current settings.
Configuration upload:
You can upload configuration data that you previously saved to a PC, to the unit.