VCS VIP 1000, Руководство пользователя

Страница: 48 / 118

Configuring the Transmitter Chapter 6
48 VIP 10 / VIP 1000
Motion alarm:
Select On if the unit is to respond to a motion alarm.
Motion detection is configured on a separate page (see page 50).
Alarm input 1:
Select On if the alarm is to be activated by external alarm sensor 1.
Furthermore, you can choose whether the alarm is to be activated by an Active
high or Active low voltage level.
Enter a designation for the alarm input in the Name field. This name will be shown
on the Video Livepage next to the associated alarm icon.
Alarm input 2:
Select On if the alarm is to be activated by external alarm sensor 2.
Furthermore, you can choose whether the alarm is to be activated by an Active
high or Active low voltage level.
Enter a designation for the alarm input in the Name field. This name will be shown
on the Video Livepage next to the associated alarm icon.
Alarm connections
You can select a number of options determining how the VIP responds to an
alarm. For example, the VIP can automatically connect to a predefined IP
address (VIP receiver or a PC with receiver software).