VCS VIP 10, Руководство пользователя

Страница: 51 / 122

Chapter 6 Configuring the Sender
VIP 10 51
Note
The video sensor monitors Stream 1. For exact motion detection it is
recommended to choose CIF as video resolution for Stream 1 (see
page 41).
In order for the sensor to function, the following conditions must be met:
]
The motion detector must be enabled.
]
At least one sensor field must be activated.
]
The individual parameters must be set for the operating environment and the
desired responses configured accordingly.
]
The sensitivity must be set to a value greater than zero.
Warning!
Reflections of light (off glass surfaces, etc.), switching lights on or off or
changes in the light level caused by cloud movement on a sunny day can
trigger unintended responses from the video sensor and generate false
alarms. Run a series of tests under day and night conditions to ensure that
the sensor works as intended.
For indoor surveillance, ensure constant lighting of the areas during the day
and at night.
Uniform surfaces without contrast can trigger false alarms even with
constant lighting.
Note
Clicking the Defaults button will reset the video sensor to its factory
configuration.
Motion detector
Select On to activate the video sensor.
Select sensor fields
The areas of the image to be monitored by the video sensor can be selected. The
video image is subdivided into 396 square sensor fields. Each of these fields can
be activated or deactivated individually. If it is necessary to exclude particular
regions of the camera's field of view from monitoring due to continuous
movement (by a tree in the wind, etc.), the relevant fields can be deactivated.