vc999 ST2, Оригинальное руководство по эксплуатации

Страница: 59 / 96

Shrink Tunnel VC999 ST2/ST2 D
Operation
2009-11-12
Art. no. 593.767 Page 59/96
9.7.2 Inputs / Outputs
Statuses of the PLC inputs and outputs are displayed in
the two diagnosis masks.
Inputs
Fig. 9/36
Signal at the PLC input
Program logic display
Logical program status
Fig. 9/37
NOTICE
The inputs X0 and X1 cannot be changed.
Outputs
Logical program status
Changing the output signal for the program logic
Signal at the PLC output
Fig. 9/38
The signal at the PLC output can be manually switched by pressing "change".
NOTICE
The machine stops when an output is manually actuated.
NOTICE
The outputs can only be operated when the service door is closed correctly and the
EMERGENCY STOP has been acknowledged.
NOTICE
The switched on outputs are reset when exiting the mask.