vc999 593.767, Оригинальное руководство по эксплуатации

Страница: 40 / 96

Shrink Tunnel VC999 ST2/ST2 D
Operation
Page 40/96
Art. no. 593.767 2009-11-12
9.3.4 Access rights
Access rights for machine operation via the display are classified into four safety levels. Each safety
level is allocated to a specific group of people that have corresponding access rights for machine opera-
tion and maintenance:
Safety level Password Authorized per-
son
Functions
0
No pass-
word Operator - Starting and stopping the machine
- Loading programs
1 2002 Supervisor of
the operator - Changing and saving program parameters
- Programming automatic starts
- Starting the decalcification program
- Starting water tank emptying
The access right is reset to safety level 0 when the
machine is switched on and off.
2 0999 Supervisor of
the operator The same as safety level 1, but with the following ex-
ception:
The access right is not reset to safety level 0 when
the machine is switched on and off. The access right
for safety level 2 is
not reset.
3 3388 VC999 service
technician
- Resetting meters to zero
- Adjusting service parameters
- Setting defect mode
- Directly controlling inputs and outputs
Password
The functions in safety levels 1-3 can only be edited after entering a password.
Access to passwords is the responsibility of the owner. The owner decides who can be trusted to use
passwords correctly.
NOTICE
The passwords cannot be changed!
The procedure for unlocking a safety level via a password is described in the section "LOG IN".
The procedure for locking a safety level via a password is described in the section "LOG OUT".