vc999 593.767, Оригинальное руководство по эксплуатации

Страница: 33 / 96

Shrink Tunnel VC999 ST2/ST2 D
Start-up
2009-11-12
Art. no. 593.767 Page 33/96
8 Start-up
8.1 Initial start-up
NOTICE
The initial start-up may only be performed by VC999 Customer Service representatives! The
customer’s personnel will receive thorough training at the same time.
WARNING
Unauthorized initial start-up itself can result in injury or damage to equipment or property!
8.1.1 Installation check
Stability
•
Check the stability of the machine. Make sure the machine is stably placed on the floor. If neces-
sary, level out the machine according to the description in the section "Leveling the machine".
Electrical connection
•
Check that the machine is connected to the electrical power supply. If necessary, plug the connect-
ing cable into the socket of the electrical power supply.
Paneling
•
Are all the panels and covers in place?
•
Have the two protective rollers been installed at belt cartridge?
•
Has the service door been closed and locked using the two star knobs?
NOTICE
The service door is only sealed against the potential risk of steam exposure when both star
knobs are tightened correctly!