vc999 07P Series, Руководство оператора

Страница: 26 / 74

Vacuum Packaging Machines 07P ...
Start-up
9 Commissioning
9.1 Initial start-up
The initial start-up should only be carried out by VC999 Customer Service personnel!
Unauthorised initial start-up can result in injuries or damage to equipment and property! The
customer’s personnel will also receive thorough training during initial start-up.
•
Check whether the machine was tilted or dropped during transport.
CAUTION
The vacuum pump motor automatically stops with incorrect phase sequence. Error message 16
appears at the display. For incorrect direction of rotation exchange 2 of the 3 phases of the
motor cable at the plug.
9.2 General instructions
•
Do not vacuum pack living creatures!
•
Do not pack rotten foodstuffs!
•
Do not put goods into circulation if the sealing seam is not intact!
•
Only use approved vacuum bags!
•
Do not leave things lying on the lid of the vacuum chamber!
•
Stop what you are doing if the vacuum chamber becomes soiled (e.g. if liquid leaks, etc.). Switch the
machine off immediately and unplug it from the mains. Clean the vacuum chamber first of all, the
platform with roller track, and then the sealing bars. Dry any parts which get wet.
•
Products must not be larger than the usable chamber height.
Page 26/74
Art. no. 527.763 2003-11-05