VBrick dme, Руководство администратора

Страница: 108 / 219

96 © Vbrick Systems, Inc.
Manage Configuration

To access the Manage Configuration buttons:
1. Navigate to
System Configuration
>
Manage Configuration.
Use the
Manage Configuration
page to set the DME defaults or reset the DME to the factory
defaults. It also lets you save the DME configuration to an xml file or restore the
configuration from a previously saved xml file.
Caution : Be aware that when you change the user name and password for
the server (See: Username and Password ) you are changing the FTP user
name and password as well. However, when restoring previously saved
settings, the FTP username and password will not be the same as the system
user name and password.
For best results you will need to login again and change the user name and
password to match the FTP username and password. (To keep the same
username and password, change the username and password to something
different, and then change it back again to the current username and
password.).
Field/Button Description
Set Defaults Reset most settings except for Network Settings, and passwords to
the factory defaults.
Set Factory Defaults Reset all settings including Network Settings and passwords to the
factory defaults.
Save Configuration This will allow you to save all configuration settings that can be
restored at a later time. This action will (1) copy and save settings
(EXCEPT NETWORK or CERTIFICATE setting) in a system
location (i.e. a "snapshot point") and (2) prompt you to download
and save a physical file that can be restored at a later time. This does
not save NETWORK or CERTIFICATE settings in these
configurations so that configurations can be shared between
different DMEs.