VBrick 9000 Series, Руководство по началу работы

Страница: 70 / 80

60 © 2012 VBrick Systems, Inc.
Monitoring an Appliance
Be aware that to use the iPhone app, your iPhone must be on the same wireless network as
the 7000/9000 Series encoder appliance.

To launch the VBrick iPhone app:
1. Tap on the VBrick icon to launch the app. The page will show any 7000/9000 Series
devices that have manually added or discovered.
2. Click on the icon to manually add devices. You will be prompted for Name, IP
Address, and login credentials. When done select a Default Device (if desired).
3. Tap on any available device to see the home page for the device.
4. Click on the
Monitor
button to display a list of Channels and then select any available
Channel. This will display (below right) the relevant status values for the selected
Channel. These values are read-only and cannot be changed.
Running Scripts
The iPhone app supports four predefined scripts that you can use to modify appliance
configuration parameters. (This is the only way you can modify parameters using the iPhone
app.) After you create and FTP these scripts (to the
scripts
folder on the appliance), you can
use them to modify configuration parameters on the appliance. You run the script by tapping
the
Control
icon.
F1
is associated with script1,
F2
with script 2, etc. You can also change the