VBrick 9000 Encoder Admin Guide
49
Chapter 3
Encoder Configuration
The options in the
Encoder Configuration
menu are used by system administrators to
configure encoder video and audio parameters. These parameters should not be changed
except by knowledgeable systems administrators.
Keep in mind:
•
VBAdmin has a read-only
View
mode and an interactive
Edit
mode where you can make
configuration changes.
•
When viewing the images in Online Help, many of the configuration options for the
encoder are mutually exclusive. This means that depending on which options you select,
you may see new fields or you may not see previously visible fields. All options, however,
are fully explained in the text.
•
Any video/audio configuration change will take approximately 20 seconds after you click
the
Apply
button. If you see the message
Previous Apply has not finished, try again
, wait 15
seconds then click
Apply
.
•
Be aware that some video and audio configuration changes can cause a 15 to 20 second
interruption on all channels every time you click
Apply
. To avoid intermittent disruptions
on units with multiple slots and channels, wait until you have configured changes on all
slots and channels, and
then
click
Apply
.
Encoder Configuration Topics:
Содержание 9000 Series
