VBrick Systems EtherneTV MPEG-1, Руководство администратора

Страница: 41 / 58

System Upgrade
STB Admin Guide 35
6. If only one file is present, just type
rm <file name>
.
Verifying the File Transfer
There are two ways to indicate the progress of the transfer. Once the update is complete, the
Web Administration program shows the version number in the upper right corner. You can
also verify file transfer success using the command prompt:
T
To check the version number using the command prompt:
1. Press
Ctrl-Alt-F1
on the set top box.
2. Type
tasteversion
to display the version number.
3. Press
Ctrl-Alt-F2
to return to the STB user interface.
Additional Upgrade Steps for Local Mode
The
Local
mode user interface may have been customized at your site and the upgrade
process does not overwrite the local user interface in order to save your changes. If you use
the local user interface provided by VBrick, and are upgrading an existing set top box, the
system update will not be complete until you perform the following steps.
T
To activate all new
Local
user interface features and functionality, you must perform the
following steps after you finish the upgrade as described above.
1. Gain access to a shell on the box using one of the following methods.
a.
Ctrl-Alt-F1
from the keyboard;
b. The serial shell;
c. Telnet.
2. If you want to preserve changes made to the user interface in
Local
mode, move the files
you have changed (most likely XM and HTM files) to the
/wfs
directory from the
/wfs/
localui
directory. For example:
mv /wfs/localui/stbLocalUIData.xml /wfs
3. Execute the following command
rm –rf /wfs/localui
4. Reboot STB by typing
reboot –f
If you did not move any files in Step 2 above, you are done. If you did move files in Step
2 above, continue with the following steps.
5. Since you may have lost the shell on reboot, regain shell access.
6. Note that the
/wfs/localui
directory once again exists.
7. For each file moved to
/wfs
in Step 2 above, move the equivalent file now in
/wfs/
localui
to its name with a
_build37xx
suffix added. These files can be examined for
model code on how to implement new features. For example:
mv /wfs/localui/stbLocalUIData.xml /wfs/localui/stbLocalUIData.xml_build37xx
8. For each file moved to
/wfs
in Step 2 above, move it back into the
/wfs/localui
directory. For example:
mv /wfs/stbLocalUIData.xml /wfs/localui