ASSEMBLY AND INSTALLATION
INSTRUCTIONS
.
s
t
n
e
m
e
ri
u
q
e
r
g
n
i
d
n
u
o
r
g
d
n
a
g
n
ir
i
w
r
o
f
s
e
d
o
c
l
a
c
ir
t
c
e
l
e
l
a
c
o
l
tl
u
s
n
o
c
,
g
n
il
l
a
t
s
n
i
e
r
o
f
e
B
.
1
:
S
E
T
O
N
2. READ AND SAVE THESE INSTRUCTIONS.
T0449
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
181017
Hex Nut (F)
Washer (G)
Rubber Pad (H)
End Cap (I)
Fitter Screw (A)
Wire Connector (B)
Hardware Package (inculded):
Turn off the power at fuse or circuit box.
Installation Steps
Bulb Type B MAX 60W
(not included)
Handle
Roundhead Screw
Flathead Screw
Fixture body
Socket Tube
Cover Assembly
Fitter Screw (A)
Grounding Wire
Wire Connector (B)
Post
1. Unscrew the roundhead screws and
flathead screws to remove the handle from
the cover assembly and to remove the
cover assembly from the fixture body.
2. Place the socket tubes onto the sockets
to cover the sockets completly.
3. Install bulbs (not included). See relamping
label at socket area or packaging for
maximum allowed wattage.
4. Restore the handle and cover assembly
to the fixture body by the roundhead screws
and flathead screws.
5. Unscrew the fitter screws (A) to remove the
fixture body away from the fitter.
6. Pull out the wires and grounding wire from the post.
Make wire connections using the wire connectors (B):
---The black wire from the fixture to the black
wire from the post.
---The white wire from the fixture to the white wire
from the post.
---The grounding wire from the fixture to the
grounding wire from the post.
Carefully put the wires back into the post.
IMPORTANT:
The sensor has an excellent photocell
function to enable the light to turn on
at dusk and off at dawn automatically.
