background image

How to Assemble / How to Operate

5

3. How to Assemble

IMPORTANT:

Always unplug the vacuum cleaner

from the electrical outlet before assembling or
removing the accessories.

1.

Insert the flexible hose into the inlet on the main

body of the vacuum cleaner. Push until it clicks into
position. (Fig 3/1)

2.

Push the telescopic extension tube on to the end of

the handle (Fig 3/2)

3.

The telescopic extension tube can be lengthened or

shortened by pushing the button in and sliding the
tube apart or together as required (Fig 3/3).

4.

Fit the combination floor head by pushing on to the

extension tube

4. How to Operate

Fully unwind the power cord. A yellow mark on the
power cord indicates the recommended length. Do not
exceed the cord length beyond the red mark.

1. On/off Button

Insert the power plug into the electrical outlet. Make
sure the vacuum cleaner is switched off.

Press the on/off button located on the top of the
vacuum cleaner to switch on the vacuum cleaner and
press the button again to turn the vacuum cleaner off.

2. Carpet Cleaning

For carpet and rug cleaning, press the rocker switch on
the combination floor head to raise the brushes

3. Hard Floor Cleaning

For hard floor cleaning, press the rocker switch on the
combination floor head to raise the brushes.

4. Cord Rewind

To rewind the power cord, press the cord rewind
button, located on the top of the vacuum cleaner and
guide the power cord with one hand. This will prevent
the cord from whipping which could cause damage or
injury.

5. Variable power

Located between the on/off and cord rewind buttons
there is a variable power dial. Turn this clockwise and
anti-clockwise to adjust the suction power.

6. Dust full indicator

This is located between the on/off and cord rewind
buttons and will light up when the dirt container is full.

7. Carry Handle

Use the carry handle located on the top of the vacuum
cleaner to move from room to room

8. Hose Storage

For convenience, there is a slot located at the back of
the vacuum cleaner where the floor tool and hose can
be parked for carrying and storage.

5. Accessories

1. 

The accessories can be attached directly to the

handle by removing the telescopic extension tube and
pushing on the desired accessory.

The accessories can also be attached to the telescopic
extension tube for extra reach. Remove the
combination floor head and push on the desired
accessory.

Crevice tool:

for crevices, corners, cracks etc

Dusting brush:

this attachment can be slid on to the

upholstery tool for delicate surfaces

Upholstery tool:

for carpet, upholstery stairs etc

TurboTool:

for pet hair, upholstery and stair cleaning.

The TurboTool should be pulled backwards for
optimum cleaning.

Fig.3/1

Fig.3/2

Fig.3/3

Fig.3/4

V-09TT User Guide.qxd  10/5/06  09:56  Page 6

Содержание V-093TT













Отзывы: