2
3
c
g
a
f
d
1
2
3
Putting your cleaner together
Stand the base in the upright
position. Assemble the mid section
onto the base, taking care not to
trap internal mains wire.
Insert the two nuts into the
recesses located on the left and
right sides of the base.
While holding the nuts in place,
insert the two medium length
screws through the front of the mid
section and tighten.
Slide the upper handle down onto
the unit. Insert the nut into the
recess in the back of the upper
handle. While holding the nut in
place, insert the long screw through
the front of the upper handle and
tighten.
Run the mains wire above the
upper cord hook and secure with
the cord clip.
Phillips screwdriver required
Parts checklist
a
Handle
b
Clean solution reservoir latch
c
Clean solution reservoir
d
Dirty water tank latch
e
Dirty water tank handle
f
Rotating brush bar
g
Dirty water tank
h
Dirty water tank lid
m
r
q
Cord clip
r
Solution release trigger
s
Upholstery water supply plug
t
Upholstery hose adaptor
u
Upholstery hose
v
Upholstery attachment
w
Upholstery trigger
x
Tool caddy /storage
y
Water supply socket
i
Brush bar on/off switch
j
Vacuum on/off switch
k
Handle screw
l
Power cord
m
Carrying handle
n
Quick cord release
o
Handle release pedal
p
Cord hook
k
e
b
p
n
o
q
l
h
j
i
s
t
u
v
w
x
y
