Let’s talk technical
Remove the hose from the vacuum cleaner
and telescopic tube. Insert a blunt instrument
into the hose to remove the blockage.
Removing a blockage from the hose
Removing blockages from the TurboTool (some models only)
Remove the bottom cover (B).
Clean out any debris or hair from
the brushbar and turbine fan.
Clean the TurboTool by removing the
2 screws (A), located on the bottom
cover, with a crosshead screwdriver.
Replace the bottom cover, insert
and tighten the screws.
B
A
CAUTION:
To reduce the risk of injury from moving parts – unplug before servicing. The brushbar is equipped with
bearings which contain sufficient lubrication for their lifetime. Do not add lubricant to the brushbar.
Unplug from the mains
and hold the cord rewind
button in, the cord
will retract into the
vacuum cleaner.
Place floorhead into
parking slot located at
back of vacuum cleaner
for storage and carrying.
Storing your vacuum cleaner
CAUTION:
Make sure to hold the cord with your other hand to prevent injury when re-winding.
