1. Parts Overview
The Unit
1
Hose Inlet
Located on the top of the unit
2
On/Off Button
Insert the plug into the electrical outlet. Press the
on/off switch on the top of the vacuum cleaner, to
switch the vacuum cleaner on and press the button
again to turn the vacuum cleaner off.
3
Variable Power
Located between the on/off and cord rewind
buttons.There is a variable power dial, press the ‘+’
to increase suction power and ‘-’ to reduce suction
power.
4
Floor Tool Parking Slot
For convenience there is a parking slot located at the
rear of the vacuum cleaner where the Floor Tool can
be parked for carrying and storage.
5
Plug
6
Auto Cord Rewind
To rewind the power cord, press the cord rewind
button, located on the top of the vacuum cleaner.
7
Lid Release Button
The cup opens up the unit for access to the dirt
container.
8
Pre-Motor Filter
This is located inside the unit, behind the dust bag.
9
Post Motor Filter
This is located above the pre-motor filter, just under
the lid of the unit.
10
Disposable Dust Bag
(1pc fitted, 1pc loose)
The dust bag compartment is located immediately
inside the unit, it can be easily lifted out for disposal.
11
Carry Handle
Use the carry handle at the front of the vacuum
cleaner to move from room to room.
12
Tool Storage
Crevice tool and 2-in-1 tool are stored under the lid.
Retain this guide for future reference.
Bagged cylinder
Vax model number:
C91-MX SERIES
GB
instruction manual
Vax careline
0870 606 1248
www.vax.co.uk
What is your vax’s serial number?
Note this down in case you need it in future
(on the base of
your cleaner)
What is your vax’s model number?
C
9
1
M X
-
-
-
8
9
12
1
2
7
3
4
10
11
5
6
Vax C91-MX User Guide v5.qxd:C91-MX User Guide 18/12/08 18:16 Page 1
All manuals and user guides at all-guides.com
all-guides.com
