Vauxhall VIVARO, Руководство пользователя

Страница: 108 / 231

106 Instruments and controls
● trip odometer
● fuel saved in miles
Unit of measurement
To change the unit of measurement
for the duration of a journey:
Vehicles with power button:
With ignition off, simultaneously press
and hold button on end of wiper lever
and press the power button
3
131.
The Driver Information Centre flashes
for approx. 10 seconds until the new
unit is displayed. Release button on
end of wiper lever when the display
stops flashing.
Vehicles without power button:
With ignition off, simultaneously press
and hold button on end of wiper lever
and switch on the ignition. The Driver
Information Centre flashes for
approx. 10 seconds until the new unit
is displayed. Release button on end
of wiper lever when the display stops
flashing.
When the engine is switched off, the
trip computer automatically returns to
the original unit of measurement.
Interruption of power supply
If the power supply has been
interrupted or if the vehicle battery
voltage has dropped too low, the
values stored in the trip computer will
be lost.
Tachograph
The tachograph is operated as
described in the operating
instructions supplied. Observe
regulations regarding use.
Depending on equipment, the
tachograph may be fitted in a console
located above the Infotainment
system in the instrument panel.