Vauxhall Movano 2021 Скачать руководство пользователя страница 170

Страница: 170 / 211

168

Vehicle care

Tyres age, even if they are not used.

We recommend tyre replacement

every six years.

Changing tyre and wheel

size

If tyres of a different size than those

fitted at the factory are used, it may be

necessary to reprogramme the

nominal tyre pressure and make

other vehicle modifications.
After converting to a different tyre

size, have the label with tyre

pressures replaced and the tyre

pressure monitoring system

reinitialised

166.

Warning

The use of unsuitable tyres or

wheels may lead to accidents and

will invalidate the vehicle

operating permit.

Wheel covers

Wheel covers and tyres that are

factory approved for the respective

vehicle and comply with all of the

relevant wheel and tyre combination

requirements must be used.
If the wheel covers and tyres used are

not factory approved, the tyres must

not have a rim protection ridge.
Wheel covers must not impair brake

cooling.

Warning

Use of unsuitable tyres or wheel

covers could lead to sudden

pressure loss and thereby

accidents.

Vehicles with steel wheels: When

using locking wheel nuts, do not

attach wheel covers.

Tyre chains

Tyre chains are only permitted on the

front wheels.
Always use fine mesh chains that add

no more than 9 mm to the tyre tread

and the inboard sides (including chain

lock).

Warning

Damage may lead to tyre blowout.

Tyre chains are permitted on tyres of

size 205/70R15, 215/70 R15,

225/70 R15, 215/75 R16 and

225/75 R16.

Содержание Movano 2021




















































































































































































































Результаты поиска

Содержание Movano 2021

Отзывы:

Бренды по названию

Популярные бренды

Vauxhall Movano 2021, Руководство пользователя

Результаты поиска

Содержание Movano 2021

Отзывы:

Бренды по названию

Популярные бренды