Vauxhall Astra 2022, Руководство пользователя

Страница: 165 / 265

Driving and operating 163
the driver does not react. The
automatic post collision braking is not
operational if the capability of the
vehicle to trigger and execute the
automatic post collision braking is
unavailable, as it can occur in
destructive accidents or in other
specific accident scenarios.
It is possible to override the automatic
braking by pressing the accelerator
pedal or the brake pedal.
System limitations
The system operates if the following
conditions are fulfilled:
● airbags or seat belt pretensioners
have been deployed by the
collision
● braking system and electric
functions remain continuously
operational during and after
collision
● driver has not depressed brake
pedal or accelerator pedal
Fault
If automatic post collision braking is
not available, the control indicator
J
or
d
illuminates continuously, a
corresponding message appears in
the Driver Information Centre and a
warning chime sounds.
Have the cause of the fault remedied
by a workshop.
Curve speed adaptation
The system adapts the vehicle speed
within its lane before entering a curve
or when already driving in the curve.
The vehicle speed is only adapted if it
is too fast for the angle of the curve. If
a vehicle is ahead, the following
distance to this vehicle is mantained.
The driver can overrule the system by
depressing the brake pedal or the
accelerator pedal:
● Depressing the accelerator pedal
temporarily pauses the function.
● Depressing the brake pedal
deactivates the function.
9 Warning
The system does not adapt the
vehicle speed in curves which are
too tight, e.g. hairpin curves.
Operation conditions
Curve speed adaption is ready to
operate if the following conditions are
met:
● The vehicle speed is between
43 mph and 112 mph.
● The Drive Assist is activated.
● The vehicle is driving on road
with separate carriageways a
such as a motorway or
expressway.
Activation
Curve speed adaption is activated via
Drive Assist.