Driving and operating
129
system only detects lane markings
on one side of the road, it will only
warn when departing the lane on
this side.
Always keep your attention on the
road and maintain proper vehicle
position within the lane. Always
keep the windscreen clean and do
not use lane departure warning
system in bad weather conditions.
When the vehicle crosses a detected
lane marking, the lane departure
warning indicator will flash and three
beeps will sound. The lane departure
warning will not warn if the turn signal
is on or if a sharp manoeuver is made.
The camera sensor is on the
windscreen ahead of the rearview
mirror.
To turn the lane departure warning
system on and off, press the LANE
DEPART
)
button.
)
will light up
when lane departure warning system
is on.
)
will appear green if the system
detects a left or right lane marking.
When the system recognises an
unintended lane change, the control
indicator
)
changes to yellow and
flashes. Simultaneously a chime
sound is activated.
To change the volume of the warning
chime, see chime volume
3
84.
When the vehicle is started,
)
will
come on briefly.
The system is only operable at
vehicle speeds above 35 mph and if
lane markings are available.
Fault
The lane departure warning system
may not operate properly and
)
may
not appear if:
■ The lane markings on the road are
not detected.
■ The camera sensor is blocked by
dirt, snow or ice.
■ The windshield is damaged.
■ The weather is limiting visibility.
This is normal operation; the vehicle
does not need service. Clean the
windshield.
If any other problem occurs or if a
problem persists, seek the assistance
of a workshop.
9
Warning
If the camera sensor is blocked by
dirt, snow, or ice, or if the
headlights are not cleaned or
Содержание Ampera
