background image

Warnings

To prevent damage to your LifePod™ or injury to yourself or to others, read the following safety 

precautions before using this unit.

IMPORTANT 

Before locking your LifePod™, always be sure 

the side compression latches are latched closed first. This 

will ensure the locking mechanism engages properly. 

IMPORTANT 

Do not undo the compression latches until the 

unit has been unlocked with the correct master code first. 

Undoing the compression latches first may cause binding 

on the lock mechanism and will not unlock.

DO NOT 

submerge in water more than 1 foot deep. The 

pressure could leak water into the inner chamber. LifePod™ 

is designed to protect against dust and splashes with brief 

short immersions and will float when loaded with weight 

up to 2lb.

To ensure proper weather sealing: 

ALWAYS 

check that the rubber gasket is free 

of debris before closing the lid

ALWAYS 

check that the side compression 

latches are fully engaged and closed

ALWAYS 

check that the front rubber cover is 

closed tightly

DO NOT 

expose to extreme heat or cold. 

Battery power may be affected. Acceptable 

operation range is -14˚f to 120˚f. 

DO NOT 

store loaded firearms in this unit.

DISCLAIMERS:

Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising 

out of the use of, or the inability to use, the Vaultek

®

 LifePod™.

The user shall determine the suitability of the Vaultek

®

 LifePod™ before the intended use and user assumes 

all risk and liability whatsoever in connection therewith.

Basic Operation

LifePod™ can protect belongings from environmental factors using 

the side compression latches alone without the need for a battery.

With the battery installed LifePod™ can lock securely using a built

in locking mechanism for additional security. Unique to LifePod™ 

is a capacitive keypad. There are no physical buttons, but each 

key can be pressed by touching the keypad surface.  

Locking

IMPORTANT

 Before locking your LifePod™, always be sure the 

side compression latches are latched closed first. This will 

ensure the locking mechanism engages properly. 

To lock, simply press and hold 

the lock pad for 2 seconds 

(Fig A).

Unlocking

IMPORTANT

 Do not undo the compression latches until the unit has been unlocked with the 

correct master code first. Undoing the compression latches first may cause binding on the lock 

mechanism and will not unlock. 

First tap the lock pad to wake 

the unit up (Fig A). When the 

keypad lights up, your 

LifePod™ is awake and 

ready to accept the code.

Enter the master code. (The 

default master code is 1-2-3-

4). When the code is correct, 

The status LED will turn GREEN 

and the lock will disengage.  

A

Undo both side compression 

latches, and you can open the 

unit.

03 Vaultek

®

04 Vaultek

®

Содержание LifePod Series














Отзывы: