Vatech Pax-i PCH-2500, Руководство по установке

Страница: 102 / 200

PaX-i
(PCH-2500) Installation Manual
102
6 Completing Miscellaneous Works
6.5 Installing the Switch Holders
Item Part No. Figure Qty Comment
SWITCH HOLDER
(Exposure switch)
12 1
w/sticker and 3
screws
SWITCH HOLDER
(Up/Down switch: Optional)
13 1
w/sticker
UP/DOWN switch holder
1. Peel off the paper from both sides.
2. Attach the UP/DOWN switch holder on the left
side of the column at the appropriate position.
Exposure switch holder
1 . Locate the exposure switch holder (Part No.12) with a sticker and 3 screws.
2 . Install the switch holder on the wall at the appropriate height using 3 screws.
Attaching the UP/DOWN switch (Optional)
E
M
E R G
E N
C
Y
S T
O
P
View from the bottom of the handle frame
If the Up/Down switch (Part No.3) is to be
installed, connect it to the following connector.