Page 60
User Manual
•
A green checkmark displays in the top-left of the screen, indicating you have
finished scanning
that segment.
STEP 8.
You will be
invited
to repeat for the opposing side…
Bite-alignment using a single bite segment
While it is
recommended,
when carrying out full-arch
scans,
that you scan
both left and right bite segments
, it
is also possible to carry out bite alignment by scanning a
single bite segment (left or right).
STEP 9.
To scan the opposing side, click
OK
;
to base the bite alignment on a single bite segment,
click
Cancel
.
The
Automatic Bite Alignment
may take a minute or two to process.
Note:
In the event of a quadrant scan, you will be asked to scan only the side of the
quadrant. When doing full arch scans, you will be prompted to scan bilateral.
Based on the left and right-side bite scans, the EzScan-i will automatically
reconstruct the alignment of the full Maxillary and Mandibular arches in occlusal
mode. When
the Automatic Bite Alignment
is completed, the 3D reconstructed
image is displayed, and the
Bite Alignment Tools
menu becomes available.
